Due to the calorific value of LED high bay lights, its quality is very limited. Because high temperature will accelerate chip aging, light decay, color shift, and shorten the life of LED high bay lights. In order to deal with this problem, it is necessary to pay attention to heat dissipation and increase the luminous efficiency of LED high bay lights. At present, the quality of LED high bay lights can be improved according to the following methods.
1. Adopt a modular approach to prepare high-power LED lamps. The light source, heat dissipation, shape structure, etc. are packaged into a whole module, and the modules are independent of each other. Any module can be replaced separately. When a part fails, only the faulty module needs to be replaced. Replace the entire lamp.
2. Enhance the thermal conductivity of the chip and reduce the thermal resistance interface layer, which usually involves the structural mode of the thermal management system, fluid mechanics, and engineering applications of super thermal conductivity materials.
3. Through the “chip-heat dissipation integration” mode, not only can the aluminum substrate structure be removed, but also multiple chips can be concentrated on the heat sink to form a multi-chip module single light source to make a high-power LED lamp.
RUDDER SERIES LED HIGHBAY 150W
RUDDER series LED high bay light launched in July 2022, with total 3 sizes, covered the wattages range from 100W to 200W, with 130-160 lumens/watt efficiency, 200W with total lumens output can reach 26000-32000 lumens, are ideal replacement to the traditional HPS or metal halide high bay lights. The whole series adapt the innovation design, put the driver components on the PCB, share the same PCB board with SMD LED. This solution can bring convenient and benefits to the manufacturer and buyers, also the installer.
This high bay LED light, designed the driver integrated with light source board, no need the extra driver box, and no need inject the glue to cover the driver components.
Also reduced the packing space, and can save the usage of packing materials a lot. This is really aenvironmental friendly solution.
To be special noted that, for the driver solution, it is different from the market normal sold DOB linear solution, which with lower cost and un-stale performance. Rudder series high bay LED light, still used switch type LED driver solution, almost the same as more in dependent high bay driver, no deduct on performance and stabilities.
RUDDER SERIES HIGH BAY150W, this high bay LED light, with at least 19500 lumens output, and available at 60°, 90°, 120° beam angle. CCT optional at 3000K, 4000K, 5000K, 5700K, 6500K, own to its compact design, more suitable for the whole sellers and retailers.
