Table of Contents
ToggleDifferent Features And Applications Of Mason's Led Tri-proof Light
What is tri proof lights?
Tri-proof Light stands for light fittings with three features: Corrosion-proof, Dust-proof, Waterproof.
It is also called vapor-tight/proof or waterproof light. To keep them from becoming damaged and meeting industry standards,
they are manufactured with special corrosion-proof silicone sealing rings and materials. Where the cable is,
the manufacturer has installed waterproof PG connectors, ensuring that water and dust cannot enter.
LED tri-proof lights are also designed to weather high-pressure situations.
The typical IP ratings of tri-proof lights include IP65 and IP66,
but some manufacturers have designed them to be IP68 and IP69.
What are the advantages of using tri-proof light?
1. Low hazard, no UV or infrared rays, creating a healthy working environment.
2. Long lifespan, through a series of aging tests, the life expectancy can reach >54,000hrs.
3. Energy-saving, led tri-proof light can save 85% energy compared to traditional lamps.
4. Less maintenance, the fixtures are highly resistant to heavy impact, specially designed to withstand harsh conditions and require little maintenance.
5. No flicker, high-quality driver technology stabilizes current and prevents the stroboscopic phenomenon and glare.
6. Protect the environment, bright LEDs, that is, energy-saving and eco-friendly, will not produce the harmful gases of mercury.
7. Easy to install, just a few simple steps, open the lid, wiring, and then close the lid.
8. Multi-mounted, suspended or ceiling mounted installation can adapt to different application scenarios.
Where can tri proof lights be installed?
Since tri-proof lights are developed to withstand even the most demanding conditions, they are ideal for industrial areas including but not limited to: underground garage, basement garages, warehouse lighting, outdoor settings, factories, supermarkets, commercial entities, etc.
How to install LED tri proof lights?
There are two key ways in which to install tri-proof fixtures:
1. Walls using the provided hardware kit
2. Ceilings using hanging kits
How to test LED tri-proof lights?
When you’ve bought the tri-proof lights, it’s only natural to make sure they work as the manufacturer described. You can conduct a series of tests to see if the lights will hold up as you hope. Most LED manufacturers have already conducted these to make sure the standards are met, including impact resistance and ingress progression. However, you can do further tests to ensure they hold up:
1. Apply water to fixture to ensure it doesn’t become water damaged
2. Submerge it briefly in shallow water for no more than five minutes
3. Connect the light to an outlet to ensure it turns on
4. Use a photometer to check its intensity
5. Take a pendulum impact tester to determine its impact resistance.
Well, there are many types of tri-proof luminaries (Halley, Patron, omni, socrates, and plato); each with its own unique sets of features, adaptive capabilities, and perks.
In fact, it’s safe to assume that some fixtures are designed for specific environments.
For instance
The lighting and protection needs of a light fixture in a carwash are much higher than those in a supermarket.
1. Indoor Garages and Parking Lots
We can all agree that car parking areas need to be well-lit at all times.
And in case you are wondering: Why?
Ample lighting helps to prevent accidents while, at the same time, improving the safety of the cars and users of the said space.
So, where can you get a light that’s not only bright enough but also strong enough to bear with the extreme temperatures of a parking lot?
A Masonled Halley LED Tri-Proof Light will do just fine.
It’s one of the best, brightest, and most reliable indoor garage lighting fixtures available.
2. Poultry Shed/Barn Lighting
Are you a rancher? If so, you need Rancher LED tri-proof lights.
Why? Or better yet, for what reasons?
Well, a Masonled patron LED light is specially designed for farm use.
Therefore, you can use it to light up your barn, poultry sheds, or farmhouses.
The best part about these tri-proof lights is that they have IP69K – IK10 protection.
This simply means that they can withstand the humid atmospheres within farmhouses and sheds.
3. High-Pressure Carwash
The biggest issue that high-pressure carwash operators often face is finding light fixtures that can withstand impact from intense and continuous flows of water jets.
Luckily Due to their strong exterior frame and high impact resistance, lights like the masonled patron LED tri-proof luminaries can be used to light up high-pressure carwashes, tri-proof lights make this issue a thing of the past.
Is that all?
No! Tri-proof lights can be used in so many other places including:
• Supermarkets,
• Slaughterhouses,
• Subways,
• Tunnels,
• Factories,
• Gas stations,
Warehouses and so on